Mercedes Benz 2003 c 320 User Manual

Page of 376
68
Safety and Security
Occupant safety
Installation of infant and child restraint 
systems
This vehicle is equipped with tether an-
chorages for a top tether strap at each of 
the rear seating positions.
Cover of top anchorage ring
Make sure that the rear backrest is 
locked in its upright position 
(
Remove cover 1 from anchorage 
ring 3.
Guide tether strap between head 
restraint and top of seat back.
Head restraint must be installed (if 
removable) and positioned such that 
the top tether strap can pass freely 
between the head restraint and top of 
seat back.
Make sure that the tether strap is not 
twisted.
Warning!
G
Please be sure to check the indicator every 
time you use the special system child seat. 
Should the light go out while the restraint is 
installed, please check installation. If the 
light remains out, do not use the 
BabySmart
TM
 restraint to transport children 
on the front passenger seat until the system 
has been repaired.
Warning!
G
Do not place powered-on laptops, cell 
phones and like electronic devices on the 
front passenger seat. Signals from such de-
vices may interfere with the BabySmart
TM
 
system. Such signal interference may cause 
the
7
 indicator lamp not to come on 
during self-test or be continuously lit, indi-
cating that the system is not functioning.
Warning!
G
Always lock backrest in its upright position 
when rear seat bench is occupied by pas-
sengers, or the extended cargo area is not in 
use. Check for secure locking by pushing 
and pulling on the backrest.
컄컄