Cardo scal-rider fm User Manual
Voice Dialing
1. Make sure your phone is ON but no call is in progress.
2. Tap the Headset's CTRL button and listen for a tone.
3. Now pronounce the name of the party you wish to call and wait
1. Make sure your phone is ON but no call is in progress.
2. Tap the Headset's CTRL button and listen for a tone.
3. Now pronounce the name of the party you wish to call and wait
for feedback from the phone. The type of feedback depends on
your phone.
your phone.
Answering Calls (Including Voice Command Feature)
The ring tone for incoming calls increases gradually. When you hear
the ring tone (on the headset), there are two ways you can answer
the call:
• Tap the CTRL button on your headset once (Figure 2)
• Assuming the Voice Command feature is active (see Section 7
The ring tone for incoming calls increases gradually. When you hear
the ring tone (on the headset), there are two ways you can answer
the call:
• Tap the CTRL button on your headset once (Figure 2)
• Assuming the Voice Command feature is active (see Section 7
below), answer the call by pronouncing loudly any word of your
choice within 7 seconds. If you remain
silent for 7 seconds the call will be
automatically rejected and the ringing will
stop.
choice within 7 seconds. If you remain
silent for 7 seconds the call will be
automatically rejected and the ringing will
stop.
Figure 2
17
Tap on logo
to answer
to answer