ONKYO dr-2000 User Manual
28
DVD/CD VIDEO 1 VIDEO 2 TV/LINE TAPE/MD
AM
VOLUME
INPUT
FM
TUNER PRESET
TUNING
SPEAKER A/B
TEST TONE
DISTANCE
CH SEL Theater-Dimensional
SETUP
Theater-Dimensional
DOWN
UP
SUBWOOFER
MODE
FM MODE PRESET MEORY
DISPLAY
SPEAKER SETUP
SURROUND
STEREO
ACOUSTIC
CONTROL
STANDBY/ON
ON
STANDBY
POWER
PHONES
OFF
ON
PHONES
OFF
ON
OFF
ON
Press the
lower part of
the cover to
open.
lower part of
the cover to
open.
1
1
2
Listening to the Radio
3
There are two ways to select radio stations:
• Manual tuning
• Presetting radio stations then selecting the preset
• Manual tuning
• Presetting radio stations then selecting the preset
channels
Presetting Radio Stations
You can preset up to 30 stations.
FM MODE
Unit
4
Tuning in a weak frequency (only for FM stations)
When you tune in a stereo FM station, the FM ST indicator lights up
if the signal is sufficiently strong.
if the signal is sufficiently strong.
If the signal is weak, you may not be able to tune to the station.
In this case, press FM MODE. The FM MUTE indicator goes off.
Then select the station to which you want to listen.
(At this time, the station will be in mono and interstation noise will
be heard.)
In this case, press FM MODE. The FM MUTE indicator goes off.
Then select the station to which you want to listen.
(At this time, the station will be in mono and interstation noise will
be heard.)
Turn INPUT to select the band (FM
or AM).
or AM).
e.g. When FM is selected.
Note
You can also select the band with the remote
controller. See next page.
controller. See next page.
Press TUNING
/
to select the
frequency.
• The frequency changes in 50 kHz steps
in FM and 9 kHz in AM each time you
press TUNING
press TUNING
/
.
• In FM, if either of the buttons is held
continuously for more than 0.5
seconds during manual tuning, the
frequencies are scanned automatically
–– FM auto tuning mode. When a
broadcast is received, scanning stops.
seconds during manual tuning, the
frequencies are scanned automatically
–– FM auto tuning mode. When a
broadcast is received, scanning stops.
Tuning Manually
Tune in the radio station you wish
to preset (see steps in the left
column of this page).
to preset (see steps in the left
column of this page).
Press PRESET MEMORY.
The MEMORY indicator lights and the
preset number starts flashing in the display.
preset number starts flashing in the display.
While the MEMORY indicator is lit
(for about 8 seconds), press TUNER
PRESET
(for about 8 seconds), press TUNER
PRESET
/
to select the preset
number.
Press PRESET MEMORY.
The radio station is registered to the
preset channel.
To register another preset station, repeat
steps 1 to 4.
preset channel.
To register another preset station, repeat
steps 1 to 4.
Unit only
Unit Only
Unit only
FM ST
FM MUTE
ch
MEMORY
2
INPUT
TUNING
ch
ch
2 1
The corresponding indicator is lit
while the input source is FM or AM.
while the input source is FM or AM.
DVD/CD VIDEO 1 VIDEO 2 TV/LINE TAPE/MD
AM
VOLUME
INPUT
FM
TUNER PRESET
TUNING
SPEAKER A/B
TEST TONE
DISTANCE
CH SEL Theater-Dimensional
SETUP
Theater-Dimensional
DOWN
UP
SUBWOOFER
MODE
FM MODE PRESET MEORY
DISPLAY
SPEAKER SETUP
SURROUND
STEREO
ACOUSTIC
CONTROL
STANDBY/ON
ON
STANDBY
POWER
PHONES
OFF
ON
PRESET MEORY
PRESET MEORY
TUNER PRESET
3
2,4
Appears when a broadcast is received.
FM MODE
ch
MEMORY