culligan h30 User Manual

SERVICING YOUR SYSTEM

FILTER REPLACEMENT

Culligan recommends that you have your Good Water Machine serviced by

your local Culligan Man.  You can rely on his or her experience and expertise

to keep your system in top operating condition.

If you wish to service your system, the filters are available from your Culligan

dealer.  See the Parts List at the end of this section for replacement numbers.

Cartridge Conditioning

The activated carbon, reverse osmosis, and polishing filter cartridges must be

conditioned as follows prior to installation into the Good Water Machine.

Your Culligan Man can do these important procedures at the time of

purchase.

Activated Carbon Cartridge - 5 gallon flush to remove carbon dust
RO Membrane Filter - 6 hour flush to remove preservative solution
Polishing Filter - 2 gallon flush to remove carbon dust

7

SERVICE SCHEDULE

When properly maintained, your Good Water Machine

™

 will give you years of

dependable service.  Use the following as a guide to get the most out of your

system.  Service frequency may vary depending on your local water condi-

tions.  High sediment, chlorine, turbidity, or hardness levels may require more

frequent service. Refer to Figures 4 & 5, on page 9.

At Least Once Per Year

Replace:

• Particle/Activated Carbon Filter(s)

• Polishing Filter

Check:

• RO Membrane Filter

- TDS Reduction Performance

- Flow Rates

• Capillary Assembly

Sanitize the System.

Use the convenient chart inside the back cover of this booklet to keep track

of your system’s maintenance.