Clarion DXZ475MP User Manual
CD/MP3/WMA Operations
English
16
DXZ475MP
Set the type of file to be played
(multi-session function)
(multi-session function)
When a single disc holds both normal CD type
tracks and MP3/WMA type tracks, use this
command to select which type of track to play.
tracks and MP3/WMA type tracks, use this
command to select which type of track to play.
∗
Default setting is “
MULTI-SESS CD
”.
• When only one type of track (either music CD
or MP3/WMA) is recorded on a disc, selecting
either type will allow playback of the disc.
either type will allow playback of the disc.
• When playing CCCD (copy-control CDs), set
to CD type.
1. Press and hold the [
BND
] button for 1
second or longer.
Each time the button is held pressed in this
way, the playback type alternates between
CD type and MP3/WMA type.
way, the playback type alternates between
CD type and MP3/WMA type.
• MULTI-SESS CD
When playing music CD only.
• MULTI-SESS MP3
When playing music MP3/WMA only.
2. When setting is completed, remove the disc
and reinsert it.
Disc-In-Play function
As long as the ignition key is turned to the ON or
ACC position, this function allows you to turn
the power to the unit and start playing the disc
automatically when the disc is inserted even if
the power is not turned on.
ACC position, this function allows you to turn
the power to the unit and start playing the disc
automatically when the disc is inserted even if
the power is not turned on.
CAUTION
• Do not try to put your hand or fingers in
the disc insertion slot. Also never insert
foreign objects into the slot.
foreign objects into the slot.
• Do not insert discs where adhesive comes
out from cellophane tape or a rental CD
label, or discs with marks where
cellophane tape or rental CD labels were
removed. It may be impossible to extract
these discs from the unit and they may
cause the unit to break down.
label, or discs with marks where
cellophane tape or rental CD labels were
removed. It may be impossible to extract
these discs from the unit and they may
cause the unit to break down.
Backup Eject function
Just pressing the [
Q
] button, ejects the disc
even if the power to the unit was not turned on.
1. Press the [
OPEN
] button to open the FLIP
DOWN PANEL.
Note:
• If the FLIP DOWN PANEL will not open far
enough, open it gently with your hand.
2. Press the [
Q
] button. Remove the disc after
it is ejected.
3. Close the FLIP DOWN PANEL.
Note:
• Always close the FLIP DOWN PANEL once you
take out the disc.
Listening to a disc already loaded
in the unit
in the unit
Press the [
SRC
] button to select the CD/MP3/
WMA mode.
When the unit enters the CD/MP3/WMA mode,
play starts automatically.
play starts automatically.
If there is no disc loaded, the indication “
NO
DISC
” appears in the title display.
The mode changes each time the [
SRC
] button
is pressed. (Modes are not displayed for
equipment that is not connected.)
equipment that is not connected.)
Radio
➜
(Satellite radio)
➜
CD/MP3/WMA
➜
(iPod BB)
➜
(CD changer)
➜
(DVD changer)
➜
(TV)
➜
AUX
➜
Radio ...
Loading a CD
1. Press the [
OPEN
] button to access the CD
SLOT behind the FLIP DOWN PANEL.
2. Insert a CD into the centre of the CD SLOT
with the labeled side facing up. The CD plays
automatically after loading.
automatically after loading.
Notes:
• Never insert foreign objects into the CD SLOT.
• If the CD is not inserted easily, there may be
another CD in the mechanism or the unit may
require service.
require service.
• Discs not bearing the
or
mark and
CD-ROMs cannot be played by this unit.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
3. Close the FLIP DOWN PANEL.
DXZ475MP_EN.book 16 ページ ２００６年１１月１０日 金曜日 午後４時５６分