GE LTC MAP User Manual

 
3-18 

Wire the alarms by connecting the alarm activation signal to the Alarm 

normally opened or Alarm normally closed contacts.   Refer to Figure 3-5 for 

Alarm Contact (Annunciator Output) locations. 

NOTE: The signal specification range for the Alarm Inputs are 120 VAC @ ¼ 

HP, 240 VAC @ 10 A, or 150 VDC @ 10 A.  If your signal is different, contact 

Support Services as noted on back cover. 

Be sure to configure the alarm jumpers (JP18 and JP19) for either normal or 

inverted output as required by your application.  

 

Figure 3-9: I/O Board Terminal Locations