Clarion MAX667VD User Manual

MAX667VD

• New discs may have some roughness around 

the edges. If such discs are used, the player 
may not work or the sound may skip. Use a 
ball-point pen or the like to remove any 
roughness from the edge of the disc.

• Never stick labels on the surface of the disc or 

mark the surface with a pencil or pen.

• Never play a disc with any cellophane tape or 

other glue on it or with peeling off marks. If you 
try to play such a disc, you may not be able to 
get it back out of the DVD player or it may 
damage the DVD player.

• Do not use discs that have large scratches, are 

misshapen, cracked, etc. Use of such discs 
may cause misoperation or damage.

• To remove a disc from its storage case, press 

down on the center of the case and lift the disc 
out, holding it carefully by the edges.

• Do not use commercially available disc 

protection sheets or discs equipped with 
stabilizers, etc. These may damage the disc or 
cause breakdown of the internal mechanism.

• Do not expose discs to direct sunlight or any 

heat source.

• Do not expose discs to excess humidity or 

dust.

• Do not expose discs to direct heat from 

heaters.

• To remove fingermarks and dust, use a soft 

cloth and wipe in a straight line from the center 
of the disc to the circumference.

• Do not use any solvents, such as commercially 

available cleaners, anti-static spray, or thinner 
to clean discs.

• After using special disc cleaner, let the disc dry 

off well before playing it.

• Exercise a good precaution when loading a 

disc. The operation panel will close 
automatically when leaving it open for a while.

• Never turn off the power and remove the unit 

from the car with a disc loaded.

Caution

Ball-point pen

Roughness

280QZ6070KA-00.0_EN.book  Page 18  Monday, February 27, 2006  2:12 PM