Clarion MAX667VD User Manual

MAX667VD

“CATS” is the acronym of “Clarion Anti-Theft 
System”.
When you set a PIN code (called as “Personal 
Code”), a theft is prevented by disabling the 
operation of the unit at the theft.
In addition, set the BLINK LED function in the 
GENERAL menu to [ON] to improve the effect of 
the CATS function (see page 26).

1. Press the [ADJ] button, then touch the 

[GENERAL] key.

2. Keep pressing the [CONT.] button more than 

2 seconds.
The SET PERSONAL CODE screen appears.

Note:
• When a Personal Code is already set, the ERASE 

3. Enter your desired 4-digit Personal Code by 

touching the [0] to [9] keys, then touch the 
[ENT] key.

* Touch the [CLR] key when you make a 

mistake in entering.

4. Enter the same Personal Code again for 

confirmation, then touch and hold the [ENT] 
key for more than 2 seconds.
The entered Personal Code will be set, and it 
will return to the previous screen.

1. Press the [ADJ] button, then touch the 

[GENERAL] key.

2. Keep pressing the [CONT.] button more than 

2 seconds.
The ERASE PERSONAL CODE screen 
appears.

3. Enter the Personal Code currently set by 

touching the [0] to [9] keys, then touch and 
hold the [ENT] key for more than 2 seconds. 
The message “CODE ERASED” appears, 
and it will return to the previous screen.

The ENTER PERSONAL CODE screen will be 
displayed when turning the ACC power on after 
performing the following operations: 
• The car battery was replaced.
• The backup power was cut off.
• The [RESET] button was pressed.

Note:
• If you forgot your Personal Code, please consult 

1. Enter your Personal Code currently set. 
2. When the correct Personal Code is entered, 

the unit will restart from the initial startup 
screen.

Note:
• When you enter a wrong Personal Code, the 

• 1 to 6 times: 15 seconds
• 7 times or more: 15 minutes

280QZ6070KA-00.0_EN.book  Page 27  Monday, February 27, 2006  2:12 PM