Clarion MAX667VD User Manual

MAX667VD

Power does not turn 
on. (No sound is 
produced.)

Fuse is blown.

Replace with a fuse of the same amperage. If the 
fuse blows again, consult your store of purchase.

Incorrect wiring.

Consult your store of purchase.

Nothing happens 
when buttons are 
pressed.

Display is not 
accurate.

The microprocessor has 
malfunctioned due to 
noise, etc.

Turn off the power and open the operation panel. 
Press the [RESET] button for about 2 seconds 
with a thin rod.

* When the [RESET] button is pressed, frequencies 

of TV/radio stations, titles, etc. stored in memory 
are cleared.

The remote control 
unit does not work.

Direct rays of the sun fall on 
the light-receptive part of 
the remote control unit.

When direct rays of the sun fall on the light-
receptive part of the remote control unit, it may not 
work.

The batteries of the remote 
control unit are dead or 
there is no battery in the 
remote control unit.

Check the batteries of the remote control unit.

[RESET] button

Disc cannot be 
loaded.

Another disc is already 
loaded.

Eject the disc before loading the new one.

There is a foreign matter 
already in place.

Eject the foreign matter forcibly.

Sound skips or is 
noisy.

Compact disc is dirty.

Clean the compact disc with a soft cloth.

Compact disc is heavily 
scratched or warped.

Replace with a compact disc with no scratches.

Sound is bad directly 
after power is turned 
on.

Water droplets may form 
on the internal lens when 
the car is parked in a humid 
place.

Let dry for about 1 hour with the power on.

The image is not 
displayed.

The parking brake is not 
engaged.

Check that the parking brake is engaged.

Disc cannot play 
with the display 
“PARENTAL 
VIOLATION” shown.

The view is limited.

Release the view limitation or change the parental 
level.
See the subsection “Setting up the parental 
level”.

280QZ6070KA-00.0_EN.book  Page 61  Monday, February 27, 2006  2:12 PM