Multi-Tech Systems MT5600BA-V92 User Manual

Chapter 1 – Product Description and Features

Multi-Tech Systems, Inc. MT5600BA-V92 User Guide

Technical Specifications

Your MultiModem II modem meets the following specifications:

Trade Name

MultiModem



Model Number

MT5600BA-V92

Server-to-Client

V.92/56K speeds when accessing a V.92 server

Data Rates

(actual speed depends on server capabilities and line conditions)

Client-to-Client

33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800,

Data Rates

14400, 12000, 9600, 7200, 4800, 2400, 1200, 0-300 bps

Fax Data Rates

14400, 12000, 9600, 7200, 4800, 2400, 300 bps

Data Format

Synchronous

and

asynchronous

Commands

AT Commands, V.25bis

Command Buffer

characters

Modem Compatibility

V.92, V.90, 56K, V.34 enhanced, V.34, V.32terbo, V.32bis, V.32,
V.25bis, V.22bis, V.22; Bell 212A and 103/113; V.42, V.42bis; V.21 &
V.23 in international versions, V.44

Fax Compatibility

V.17/14.4K, Group 3, Class 1, 1.0, 2

Error Correction

V.42

Data Compression

V.44 (6:1 throughput), V.42bis, MNP Class 5 (2:1 throughput)

Speed Conversion

Serial port data rates adjustable to 300, 1200, 2400, 4800, 9600, 19200,
38400, 57600, 115200, and 230400 bps

Mode of Operation

Fax online modes; full duplex over dial-up and two-wire or four-wire
leased lines; data mode, command mode, online command mode, V.54
test mode

Flow Control

XON/XOFF

(software),

RTS/CTS (hardware)

Transmission Level

-11 dBm (dial-up—varies depending on country or region for which the
modem is set), -10 dBm (leased-line)

Frequency Stability

±0.01%

Receiver Sensitivity

-43 dBm under worst-case conditions

AGC Dynamic Range

Connectors

One DB25F (RS-232C/D) connector; three RJ-11s

Cables

Three modular telephone cords (USA); country- or region-specific
cordage for International models; one 9-pin to 25-pin serial cable for
International models; external power transformer
Note:

Any cables connected to the computer should be shielded to

reduce interference.

Indicators

32-character backlit LCD for status and configuration information; LEDs
for Transmit Data, Receive Data, Carrier Detect, Off Hook, Terminal
Ready, and Test Mode

Speaker

1-inch speaker for call progress monitoring

Manual Controls

Power switch, speaker volume control, four LCD control buttons