Multi-Tech Systems MT5600BL-V.90 User Manual
Chapter 6 - Callback Security
38
Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)
8. Press
Æ
Æ
Æ
Æ
Æ, Æ
Æ
Æ
Æ
Æ to go to the
ENTER NUMBER #2?
screen.
9. Repeat steps 3–7 to enter the next number.
10. Repeat as many times as necessary, up to memory location 30, until all numbers
have been entered.
Warning:
There is no way to review an entry to confirm that it has been entered
correctly. If you attempt to look at a number entry by pressing the
Enter
button for an
ENTER NUMBER #n?
screen, it is possible for you to accidentally erase the entry.
Cal
Cal
Cal
Cal
Calling P
ling P
ling P
ling P
ling Pr
r
r
r
roc
oc
oc
oc
ocedur
edur
edur
edur
edure
e
e
e
e
Use the following procedure to call a modem that has callback security enabled.
Note:
Autoanswer must be enabled on the calling modem (
S0=1
or
S0=2
).
1. Using a data communication program such as HyperTerminal, dial the number of
the callback modem.
2. When the connection is established, the callback modem responds with a
request for a password.
3. Type the password for your modem, and then press E
NTER
. You have three
attempts to enter a valid password or be disconnected.
4. If the password is valid, the callback modem disconnects. Then, after a short
delay, it calls the number associated with the password and establishes a
working connection.
working connection.
Note:
If you are calling a direct connect number, you must append a hyphen (-) to
the password. If the corresponding phone number has
- as its first character, you will
be able to go directly online with the callback modem. If the corresponding phone
number has no
number has no
-
character, you will be prompted for a different password.