Hanna Instruments hi 99181 User Manual

w w w . h a n n a i n s t . c o m

This Instrument is in Compliance

with the CE Directives

Dear Customer,
Thank you for choosing a Hanna Instruments
Product.
Please read this instruction manual carefully
before using the instrument. This manual will
provide you with all the necessary informa-
tion for the correct use of the instrument, as
well as a precise idea of its versatility in a
wide range of applications.
This instrument is in compliance with the 
directives.

All Hanna Instruments meters are warranted
for two years against defects in workmanship
and materials when used for their intended pur-
pose and maintained according to instructions. The
probes are warranted for a period of six
months.

This warranty is limited to repair or replacement
free of charge.  Damage due to accidents, misuse,
tampering or lack of prescribed maintenance are
not covered.

If service is required, contact the dealer from whom
you purchased the instrument. If under warranty,
report the model number, date of purchase, serial
number and the nature of the problem. If the repair
is not covered by the warranty, you will be notified
of the charges incurred. If the instrument is to be
returned to Hanna Instruments, first obtain a Re-
turned Goods Authorization Number from the Cus-
tomer Service department and then send it with
shipment costs prepaid. When shipping any instru-
ment, make sure it is properly packaged for com-
plete protection.

Remove the instrument from the packing ma-
terial and examine it carefully to make sure
that no damage has occurred during ship-
ment. If noticeable damage is evident, notify
your dealer.

Note: Save all packing material until you

are sure that the instrument functions
correctly. All defective items must be
returned in the original packing to-
gether with the supplied accessories.

HI 99181 is a portable, microprocessor-based
pH and temperature meter with a special
probe. The HI 1414D/50 probe has been spe-
cially designed with flat tip for skin pH mea-
surement.
Moreover, a built-in temperature sensor al-
lows simultaneous pH and temperature
readings and a mini amplifier renders mea-
surements impervious to noise and electri-
cal interferences.
The meter is supplied with:

•

  HI 1414D/50 pH/temperature probe with

flat tip, 50mm-long body, DIN connector
and 1 m (3.3') cable

•

  HI 70004 pH 4.01 buffer, 20 mL sachet

•

  HI 70007 pH 7.01 buffer, 20 mL sachet

•

  HI 700620 Cleaning & disinfection solution

for skin residuals, 20 mL sachet (2 pcs.)

• HI 700621 Cleaning solution for skin grease

and sebum, 20 mL sachet (2 pcs.)

• 3x1.5V AA alkaline batteries

• 

instruction manual.

Hanna Instruments reserves the right to modify
the design, construction and appearance of its
products without advance notice.

1. Automatic Temperature Compensation
    indicator
2. Stability indicator
3. Battery percentage
4. pH calibration indicator
5. Low battery indicator
6. Selectable temperature unit
7. Secondary display
8. Primary display
9. Measuring unit for primary display

    

ISTR99181   06/03

-2.00 to 16.00 pH

-5.0 to 105.0°C / 23.0 to 221.0°F

0.01 pH / 0.1°C / 0.1°F

±0.02 pH

±0.5°C up to 60°C; ±1°C outside

±1°F up to 140°F; ±2°F outside

±0.02 pH

±0.2°C or ±0.4°F

Automatic

Automatic, 1 or 2 point

with 2 sets of standardized buffers

(4.01/7.01/10.01 or 4.01/6.86/9.18)

amplified pH/temperature probe

3 x 1.5V AA / IEC LR6

approx. 1500 hours

after 8 minutes of nonuse

0 to 50°C; RH 100%

Dimensions150 x 80 x 38 mm (5.9 x 3.2 x 1.5”)
Weight

245 g (8.6 oz.)

HI 1414D/50 Amplified pH probe with flat tip,

50mm-long body, built-in tem-
perature sensor, DIN connec-
tor and 1 m (3.3') cable.

pH 4.01 buffer solution, 20 mL
sachet (25 pcs.)

pH 4.01 buffer sol., 500 mL bottle

pH 6.86 buffer solution, 20 mL
sachet (25 pcs.)

pH 6.86 buffer sol., 500 mL bottle

pH 7.01 buffer solution, 20 mL
sachet (25 pcs.)

pH 7.01 buffer sol., 500 mL bottle

Storage solution, 230 mL bottle

Storage solution, 460 mL bottle

General purpose cleaning solu-
tion, 230 mL bottle

General purpose cleaning solu-
tion, 460 mL bottle

Cleaning & disinfection solution
for skin residuals, 20 mL sa-
chet (25 pcs.)

Cleaning & disinfection solution
for skin residuals, 230 mL bottle

Cleaning & disinfection solution
for skin residuals, 460 mL bottle

Cleaning solution for skin
grease and sebum, 20 mL sa-
chet (25 pcs.)

Cleaning sol. for skin grease
and sebum, 230 mL bottle

Cleaning sol. for skin grease
and sebum, 460 mL bottle

Conductive electrolyte solution
for pH measurement, 30 mL
dropper bottle

Blue shockproof rubber boot

Orange shockproof rubber boot

Hard carrying case