OKI LP440 User Manual

42

To print using the Wireless LAN model, you need to have a 

properly configured wireless LAN set up. The next step is to 

configure the printer to share the same network settings in 

order to establish communication. 
1. Check the DIP Switches:  

• The printer’s DIP switches are factory set for WLAN 

operation. 

• Check that Dip switch 1 is OFF and Dip switch 2 is ON. 
• If you need to reset other switches, refer to the full DIP-

Switch table in the next chapter, “Interface 

Specifications.”

2. Setup a connection to the Wireless Network 

• Ensure that your printer is configured with the proper

- IP address
- Subnet mask
- Gateway
- SSID
- Channel
- WLAN  mode
- Security settings  

• Refer to your MIS personnel for details of your existing 

wireless network settings. 

Note: When printing with the WLAN interface, the usable 

range between the printer and the host may vary 

depending on the usage environment and the 

capabilities of the connected devices.