Mio miomap-v3.2-c210 User Manual

 

31

In the top right corner of the screen you have another button that leads to a new 
screen where you can synchronize the clock of your PNA to the very accurate time 
provided by the connected GPS. 

 

Turn on the Auto Correction switch to let MioMap frequently check and correct the 
PNA time with the GPS time. 

Below that button you will see the current values of the GPS and the PNA clocks. 

You can check here whether any correction is needed. Tap the 

 button to 

manually synchronize the time. 

Below the PNA time you have hour and minute controls to manually correct the time 
with or without a valid GPS time. It also gives you the chance to correct the time after 
synchronization if your PNA does not support time zones or daylight saving time. 

The Route Information screen has all the data and some of the functions you need 
while you navigate. Some additional functions can be found in the Route menu 
(Page  41). Without an active route one of the buttons is inactive and route data 
cannot be displayed. 

As a reminder, you can open this screen two ways: tapping the Info button in the 
Route menu (Page 45), or tapping one of the Route Data fields on the Cockpit 
screen. 

 

In the top section of the screen you see information about the current route. These 
fields are continuously updated while you keep this screen open.