Multiquip mt-86d User Manual

8.

–  Laminated wood with tempered steel plate for

superior shock absorption.

9. Muffler– Used to reduce noise and emissions.

10. Engine Air Cleaner – Prevents dirt and other debris

from entering the engine.

11.

–  Use in the starting of the

engine. Press lever to engage. After engine starts lever
will return to original position.

12. Fuel Filter – Located inside fuel tank. Prevents dirt and

debris from entering fuel system.

13.

– Used when starting the engine.

Pull starter handle sharply and quickly, then return
starter handle to starter case before releasing.

14. Handle – To operate rammer  

GRIP handle assembly

firmly on both sides.

15. Bellows  – Reservoir for oil bath.

Figure A shows the location of the controls  and components
for the MT-86D Tamping Rammer. The functions of each
control is described below:

1. Fuel Tank/Cap 

–  Remove this cap to add diesel fuel.

Use high grade automotive diesel fuel only.

2.

– Controls engine speed and the tamping

action of the rammer.

3.

– Indicates the level of the engine oil

Use CC class or higer grade motor oil.

4.

– Prevents dirt and other debris from entering the

engine.

5. Oil Bath Fill Plug – Open this plug to add oil to the oil

bath reservoir.

6.

– Indicates the level of oil in the oil

bath reservoir.

7. Drain Valve – Open this valve to remove oil from the

bellows.