ZyXEL Communications P-2602HW(L)-DxA User Manual
P-2602HW(L)-DxA Series Quick Start Guide
7
3.3 VoIP Setup
1 Click VOICE OVER INTERNET SETUP.
Note: You should have the information provided
by your VoIP service provider.
2 Enter the information provided by your VoIP
service provider. Keep the default settings if your
VoIP service provider did not provide some
information. If you have a SIP account like
1234567@VoIP-provider.com, the SIP Number
is 1234567, and the SIP Service Domain is VoIP-
provider.com.
VoIP service provider did not provide some
information. If you have a SIP account like
1234567@VoIP-provider.com, the SIP Number
is 1234567, and the SIP Service Domain is VoIP-
provider.com.
3 When you are done, the PHONE light should be
on. Close the wizard and the main screen opens.
3.4 Regular Phone Line Setup (“L” Models Only)
When one of your VoIP accounts is registered, the P-2602HW(L)-DxA normally uses the Internet (not the
regular phone line) to make phone calls. Follow the directions in this section to make sure you can also use
the regular phone line while one of your VoIP accounts is registered.
regular phone line) to make phone calls. Follow the directions in this section to make sure you can also use
the regular phone line while one of your VoIP accounts is registered.
Note: When the ZyXEL Device does not have power, only the phone connected to the PHONE 1 port
can be used for making calls. Ensure you know which phone this is, so that in case of emergency
you can make outgoing calls.
you can make outgoing calls.
In the main screen, click VoIP > PSTN Line.