Cannon DC 310 User Manual

Page of 93
Preparations
 • 19
1 Disconnect the compact power 
adapter from the camcorder.
2 Unplug the power cord from the 
power outlet and the compact 
power adapter. 
Press 
 to release the battery 
pack. Slide the battery pack down 
and then pull it out.
IMPORTANT
• Turn off the camcorder before 
connecting or disconnecting the 
compact power adapter. After you turn 
the 
 switch to 
, important file 
allocation data is updated on the disc. 
Be sure to wait until the PLAY and 
CAMERA mode indicators are 
completely off.
• You may hear some noise from the 
compact power adapter during use. 
This is not a malfunction.
• We recommend charging the battery 
pack in temperatures between 10 °C 
and 30 °C (50 °F and 86 °F). Outside the 
temperature range of 0 °C to 40 °C 
(32 °F to 104 °F), the charging will not 
start.
• Do not connect to the camcorder’s DC 
IN terminal or to the compact power 
adapter any electrical equipment that is 
not expressly recommended for use 
with this camcorder.
• To prevent equipment breakdowns and 
excessive heating, do not connect the 
supplied compact power adapter to 
voltage converters for overseas travels 
or special power sources such as those 
on aircraft and ships, DC-AC inverters, 
etc.
NOTES
• The CHARGE indicator also serves as a 
rough estimate of the charge status.
Continuously on: Battery pack fully 
charged.
Two quick flashes at 1-second intervals: 
Battery pack at least 50% charged. If 
the indicator flashes quickly but not 
exactly in this pattern, refer to 
Troubleshooting  (
70).
One flash at 1-second intervals: Battery 
pack less than 50% charged.
• We recommend that you prepare battery 
packs to last 2 to 3 times longer than 
you think you might need.
• U.S.A. and Canada only: The 
Lithium ion/polymer battery 
that powers the product is 
recyclable. Please call 
1-800-8-BATTERY for 
information on how to recycle 
this battery.
Preparing the Accessories
Fasten the grip belt.
Adjust the grip belt so that you can 
reach the zoom lever with your index 
finger, and the 
 button with 
your thumb.
O
NCE
 
THE
 
BATTERY
 
PACK
 
IS
 
FULLY
 
CHARGED
 
T
O
 
REMOVE
 
THE
 
BATTERY
 
PACK
 
BATT.
Start/Stop
CO
PY