Cannon DC 310 User Manual

Page of 93
26 • 
Preparations
yourself in the picture when recording 
with the self timer. 
NOTES
About the LCD and viewfinder screen: The 
screens are produced using extremely 
high-precision manufacturing techniques, 
with more than 99.99% of the pixels 
operating to specification. Less than 
0.01% of the pixels may occasionally 
misfire or appear as black, red, blue or 
green dots. This has no effect on the 
recorded image and does not constitute a 
malfunction.
LCD Backlight
You can set the brightness of the LCD 
screen to normal or bright.
Hold 
 pressed down for more 
than 2 seconds.
Repeat this action to toggle between the 
normal and bright settings.
NOTES
• This setting does not affect the 
brightness of the recording.
• Using the bright setting will shorten the 
effective usage time of the battery pack.
Inserting and Removing a Disc
Inserting the Disc
1
Turn the 
 switch to ON to set 
the camcorder in 
 
mode.
2
Slide 
 fully in the direction of 
the arrow and gently open the disc 
cover completely until it stops.
180°
Subject can monitor the LCD screen
DISP.
Use only 8 cm (3 in.) mini DVD discs 
marked with the DVD-R 
 logo 
(including DVD-R DL) or the DVD-RW 
 logo. Refer also to Discs that 
6).
Before inserting the disc be sure to 
check that the recording surface is 
clean. If necessary, use a soft lens-
cleaning cloth to remove any 
fingerprints, dirt buildup or smudges 
from the disc surface.
(
 
Pick up lens
OPEN
CO
PY