Crestron c2enet-1 c2enet-2 User Manual

Crestron C2ENET-1/-2 

2-Series Ethernet Interface Expansion Cards 

The Viewport title bar will display the new communication settings, e.g., “Connected 
to ConferenceRoom.com on Port 41795.” 

For information on secure sockets layer (SSL) configuration, refer to the latest 
versions of the Crestron 2-Series Control Systems Reference Guide (Doc. 6256), and 
the Crestron e-Control Reference Guide (Doc. 6052). They may be downloaded from 
the Downloads | Product Manuals | Software section of the Crestron website 
(

www.crestron.com)

. 

1.  To verify the C2ENET card communication, open Viewport on your PC 

and select Remote | TCP/IP | Connect from the Taskbar. The “Crestron 
Viewport TCP/IP Connect” window appears. 

 

2.  Enter the IP number you entered earlier and click Connect. The Crestron 

Viewport confirms the connection. 

 

NOTE: If the following Error window opens, verify IP address and repeat steps 1 
and 2. 

•  11