Microtek gnc m timv320 1104 User Manual

1. Make sure the SD card*

containing the files you wish

to download is inserted in the

DV camera.

2. Make sure that the USB

Switch function is switched

to USB Mode ( ).

If the USB Switch is set to the incorrect mode, you will

need to do the following:
a. Press the MENU button to enter the Setup mode

( ).

b. Select “

” – USB Switch,

then select   —“USB Mode”.

c. Press the   button, then the

MENU button to exit the

menu.

• With an SD card installed in your DV camera, the system

reads both contents from the SD card and the DV

camera’s internal memory.

• Without an SD card installed in your DV camera, the

system reads contents from the internal memory alone.

• The SD card may be placed into any card reader device.

The files stored on the card can then be read from the

card reader and copied to the computer.

1. Make sure your computer is turned on.
2. Connect the DV camera to your computer, using the

provided USB cable.

•

Connect the narrow end of

the USB cable to the DV

camera’s USB connector.

•

Connect the flat  end of the

USB cable to the USB

connector of your

computer.

In a few moments, your computer will automatically

detect the DV camera.

* SD card is optional and is not included with your purchase.