Hypercom 1101 User Manual
IN-tact 1101 Software Configuration Guide
21
Configuration Screens
Configuring the IN-tact 1101
Ethernet Port Advanced Settings Screen
On the navigation tree, click IN-tact Setup > System Setup > Ethernet Port > Advanced. The
Ethernet Port Advanced Settings screen appears:
Ethernet Port Advanced Settings screen appears:
Several additional settings are available by clicking Advanced on the Ethernet Port Settings
screen. These settings can be used to “fine tune” IN-tact 1101 performance on your network.
screen. These settings can be used to “fine tune” IN-tact 1101 performance on your network.
Field/Button
Description
Keep Alive
Use this checkbox to enable or disable the keep alive features of the
IN-tact 1101. This feature is enabled by default.
IN-tact 1101. This feature is enabled by default.
During keep alive operation, the IN-tact 1101 holds an established
connection open for specified amount of time before automatically
disconnecting.
connection open for specified amount of time before automatically
disconnecting.
When enabled, the IN-tact 1101 sends a keep alive message on each
host connection at intervals set by the keep alive timer.
host connection at intervals set by the keep alive timer.
Keep Alive Timer (seconds)
Enter the value (in seconds) between keep alive messages set to the
host. Five seconds is the minimum, 600 seconds is the maximum.
Thirty seconds is the default value.
host. Five seconds is the minimum, 600 seconds is the maximum.
Thirty seconds is the default value.
TCP Window Size
Use the drop-down list to select the size of the TCP window to be
used. Choose a value between 2KB and 8KB. The default value is
2KB.
used. Choose a value between 2KB and 8KB. The default value is
2KB.
Number of Session Retransmits
Use the drop-down list to select the number of retransmissions
allowed during a session. The default value is 4 and should not be
changed.
allowed during a session. The default value is 4 and should not be
changed.