Hypercom 1101 User Manual

IN-tact 1101 Software Configuration Guide

41

Configuration Screens

Configuring the IN-tact 1101

(Used when configuring connections requiring HTTP protocol)

On the navigation tree, click IN-tact Setup > Application Setup > Host Port. Select HTTP 
Connection Type and click Edit.

The IN-tact 1101 uses the addressing information entered here to route transactions to the 
appropriate destination. Both a primary and alternate IP address or URL can be configured for 
each host processing function. Contact the host processor to obtain the correct IP and port 
address for routing if unknown. 

    

NII

This is the NII routing code entered for this processor on the Host Port 
Settings screen. It is provided as a reminder of which processor you 
are currently working with.

Description

This is the description (or name) entered for this processor on the 
Host Port Settings screen. It is provided as a reminder of which 
processor you are currently working with.

Enable SSL 

Use this checkbox to enable Secure Socket Layer (SSL) if the host 
requires this type of encryption. 

Include Two-byte Message 
Length Header

Use this checkbox to enable Hypercom's proprietary POS LAN 
header if required for this host connection. This option is disabled by 
default. The two options below allow further control of the header and 
should be enabled or disabled according to how the host processor is 
configured.