Microtek gnc i sm9800xl 1201 User Manual
ScanMaker 9800XL Installing and Getting Started 13
Positioning Reflective Originals
1. Lift the scanner lid.
2. Place the original to be scanned face down on the scanner’s glass surface. Center
the top of the original along the horizontal ruler on the scanner.
If you are scanning a book or thick materials/documents, lift the scanner lid out
of its hinge sockets high enough to create room between the originals and the lid.
of its hinge sockets high enough to create room between the originals and the lid.
3. Lower the scanner lid.
Note: To scan transparency materials (positive or negative films) with the
ScanMaker 9800XL, you should have an optional Transparent Media Adapter
(TMA1600). For more details on the TMA1600, contact Microtek Customer Service.
ScanMaker 9800XL, you should have an optional Transparent Media Adapter
(TMA1600). For more details on the TMA1600, contact Microtek Customer Service.
2
1
0
3
4
5
6
5
4
3
2
1
Please note that the
calibration window on the
glass surface should be kept
clear and free from any
obstruction during scanning.
calibration window on the
glass surface should be kept
clear and free from any
obstruction during scanning.