Garmin 550 User Manual

  Power button

  Zoom in, raise volume, or increase 

brightness. 

  Zoom out, lower volume, or 

decrease brightness.

  

Page button—scroll through the 

Map, Compass, Trip Information, Media 

Player, and Phone Menu pages. Press and 

hold to adjust brightness.

  

Speak button—press to adjust 

volume level. Press and hold to announce 

voice directions.

Part Number 190-00697-01 Rev. C          

March 2007    

  Printed in Taiwan

© 2006–2007 Garmin Ltd. or its subsidiaries
Garmin

®

 is a trademark of Garmin Ltd. or its 

subsidiaries, registered in the USA and other 

countries. zūmo

™

 is a trademark of Garmin 

Ltd. or its subsidiaries. These trademarks may 

not be used without the express permission 

of Garmin. 
The Bluetooth

®

 word mark and logos are 

owned by the Bluetooth SIG, Inc., and any use 

of such name by Garmin is under license.
For the latest free software updates (excluding 

map data) throughout the life of your Garmin 

products, visit the Garmin Web site at  

www.garmin.com.

WARNING: 

This product contains a 

lithium-ion battery. See the Important 

Safety and Product Information guide in 

the product box for important battery safety 

information.

WARNING: 

When your zūmo is not in the 

motorcycle mount, use the weather cap to 

prevent damage to the connector.

CAUTION: 

To prevent damage to the 

touch screen, do not place sharp objects in 

the carrying case pocket.

 Fold and keep this guide in your 

carrying case pocket. 

Water resistance: IPX7 waterproof 

(submersible in 1 meter of water for up to 

30 minutes)
Power: Vehicle power cable, AC cable
Battery: Rechargeable, replaceable lithium-

ion battery. 
Battery life: Fully charged, up to 4 hours
For more information, see the owner’s 

manual on disk. See the Important Safety 

and Product Information guide in the 

product box for product warnings and 

important information.

To turn on your zūmo, press and hold 

the   

 button. Follow the  

on-screen instructions. 

Go outdoors to an open area, away 

from tall buildings and trees. Turn on 

the zūmo. Acquiring satellite signals 

may take a few minutes. 

 bars indicate GPS satellite 

strength. When the bars are green, your 

zūmo has acquired satellite signals, and 

you can start navigating.

To charge your zūmo, connect it to a 

power source using the vehicle power 

cable or AC cable. 

If the touch screen is not responding 

properly, calibrate the touch screen. 

Turn the unit off. Press and hold the 

 

 button for about one minute 

until the Calibration screen appears. 

Follow the on-screen instructions.

If your unit freezes up, press and hold 

the   

 button and press  .