Crestron cen-io User Manual

Crestron CEN-IO 

Ethernet Input/Output Module

NOTE:

CABLES ARE NOT SUPPLIED.

ETHERNET CONNECTION NOT SHOWN.

PC

POWER PACK

(500 mA)

(1000 mA

for CENI-IO)

TO

CONTROLLABLE DEVICES

FROM DEVICE OUTPUTS

INPUT/OUTPUT

TO 

CONTROLLABLE

DEVICES

RELAY OUTPUT

- CONTACT CLOSURES

- SOLID STATE CLOSURES

- LIGHTING SYSTEMS

 

The CEN-IO setup menus can be accessed only after connecting the communications 
port of the PC to the PC port on the CEN-IO. Communication cables are not 
provided. Refer to “Preparation for Use” on page 6 for CEN-IO hookup details. 
After connecting the CEN-IO and before applying power, open the communications 
package that resides on the PC. Viewport from either SIMPL Windows or 
VisionTools Pro is used in the illustrations that follow. Be sure to set the PC 
communication parameters as shown below.  

 

•  7