Crestron cen-io User Manual

Crestron CEN-IO 

Ethernet Input/Output Module

Community strings are passwords that let an SNMP controlled device know the 
priviledge level of the controller with which it is communicating. There are seperate 
community strings for read only permission and read writer permission. 

Default router is the address of the router the device uses to communicate with 
devices that are not connected directly to the local network. 

Internet protocol address is a unique number that is used to represent every single 
computer in a network. All the computers on the internet have a unique IP address. 
The format of the IP address is four numbers separated by dots (e.g., 198.123.456.7).  

Internet protocol mask is a number that is used in conjunction with the IP address to 
determine whether or not a particular IP address is on the local network. If it is on 
the local network, communicate directly. Otherwise, use a router attached to the IP 
network. The IP mask for any device should be assigned by whoever manages the 
local network. The format of the IP mask is four numbers separated by dots (e.g., 
255.255.255.0).  

IP MTU is the maximum packet size that the device can transmit. It is not necessary 
to change this value from 1500 for an all ethernet network. 

MAC address is a unique hardware address assigned to every network device in use. 
The MAC address is assigned by Crestron at the factory and is never changed. 

•  29