Human Touch ht-270 User Manual

INSTALLING THE NEW BACKREST COVER

1.  Place the new backrest cover on the floor behind the chair, as shown (Fig.4).
2.   Connect the three sets of connectors.
3.   Thread the remote control cables from the backrest through the backrest cover, so

that they are accessible after the backrest cover is installed.

4. Place the backrest cover into position, aligning the four screw holes.
5. Using the 5/32" (4mm)

Allen key, replace the four backrest screws.

NOTE: Be sure to use the two longer screws in the upper screw holes and the two

shorter screws in the lower screw holes.

6. Reconnect the remote control cables, then push the cables into the backrest.

7. Using a Phillips-head screwdriver, replace the two remote control bracket screws.

(Fig.4)

Please send any questions or comments regarding these instructions to: documentation@humantouch.com

™

, LLC.