Garmin da42-l360 User Manual

190-01062-01  Rev. A 

10

1)  Press the ADF/DME or DME Softkey.
2)  Turn the large FMS to select the DME source field.
3)  Turn the small FMS Knob to select the desired Nav radio.
4)  Press the ENT Key to complete the selection.

    Press the COM1 MIC, COM2 MIC, or COM3 MIC Key (optional COM, if 

installed) on the audio panel.

    Press the COM1, COM2, or COM3 Key (optional COM, if installed) on the 

audio panel.

1)  To begin navigating using a navigation radio, press the CDI Softkey on the 

PFD to select VOR1/LOC1 (NAV1) or VOR2/LOC2 (NAV2).

2)  Press the NAV1

,

 NAV2

,

 DME

,

 or ADF

 

Key on the audio panel to select or 

deselect the navigation radio audio source.  All radio keys can be selected 
individually or together.

1)  Press the small tuning knob to select the desired radio for tuning.  A light 

blue box highlights the radio frequency to be tuned.

2)  Turn the respective tuning knobs to enter the desired frequency into the 

standby frequency field.  The large knob enters MHz and the small knob 
enters kHz.

3)  Press the Frequency Transfer Key to place the frequency into the active 

frequency field.