Garmin da42-l360 User Manual

190-01062-01 Rev. A

21

1)  Turn the large FMS Knob to select the ‘AUX’ page group.
2)  Turn the small FMS Knob to select the first rectangular page icon.
3)  The current ‘PAGE MODE’ is displayed at the top of the page:  ‘AUTOMATIC’ 

or ‘MANUAL’.   To  change  the  page  mode,  press  the AUTO  or  MANUAL 
Softkey.

4)  For Direct-to planning:

a)  Press the WPTS Softkey and verify that the starting waypoint field 

indicates ‘P.POS’ (present position).

b)  If necessary,  press the MENU Key and select ‘Set WPT to Present 

Position’ to display ‘P.POS’.

c)  Press the ENT Key and the flashing cursor moves to the ending 

waypoint field.

d)  Enter the identifier of the ending waypoint and press the ENT Key to 

accept the waypoint.

    Or:
    For point-to-point planning:

a)  Enter the identifier of the starting waypoint.
b)  Once the waypoint’s identifier is entered, press the ENT Key to accept 

the waypoint.  The flashing cursor moves to the ending waypoint.  

c)  Again, enter the identifier of the ending waypoint.
d)  Press the ENT Key to accept the waypoint.

    Or:
    For flight plan leg planning:

a)  Press the FPL Softkey (at the bottom of the display).
b)  Turn the small FMS Knob to select the desired flight plan (already 

stored in memory), by number.

c)  Turn the large FMS Knob to highlight the ‘LEG’ field.
d)  Turn the small FMS Knob to select the desired leg of the flight plan, or 

select ‘CUM’ to apply trip planning calculations to the entire flight plan.