Garmin da42-l360 User Manual

190-01062-01 Rev. A

39

1)  Turn the large FMS Knob to select the Map Page Group.
2)  Turn the small FMS 

Knob

 to select the Traffic Map Page.

3)  Press the OPERATE Softkey to begin displaying traffic.  ‘OPERATING’ is 

displayed in the Traffic Mode field.

4)  Press the STANDBY Softkey to place the system in the Standby Mode.  

‘STANDBY’ is displayed in the Traffic Mode field.

5)  Rotate the Joystick clockwise to display a larger area or rotate counter-

clockwise to display a smaller area.

6)  Press the TNA MUTE Softkey to mute the “Traffic Not Available” aural 

alert.

1)  Ensure TIS is operating.  With the Navigation Map displayed, press the 

MAP Softkey.

2)  Press the TRAFFIC Softkey.  Traffic is now displayed on the map.

1)  Turn the large

 Knob to select the Map Page Group.

2)  Turn the small

 FMS Knob

 to select the Traffic Map Page.  ‘OPERATING’ is 

displayed in the Traffic Mode field.

3)  Press the 

 Softkey to change the altitude volume.  Select the 

desired altitude volume by pressing the 

, 

, 

, or 

 (unrestricted) Softkey.  The selection is displayed in the Altitude 

Mode field.

4)  Rotate the 

 clockwise to display a larger area or rotate counter-

clockwise to display a smaller area.

5)  Press the MUTE Softkey to mute TAS voice alerts.

1)  Ensure TAS is operating.
2)  With the Navigation Map displayed, press the MAP Softkey.
3)  Press the TRAFFIC Softkey.  Traffic is now displayed on the map.