Mackie ms1402vlz User Manual
21
RUDE SOLO LIGHT
+28
CLIP
0dB
=
0dBu
+10
LEFT
RIGHT
+7
+4
+2
0
-2
-4
-7
-10
-20
-30
POWER
PHANTOM
MAIN MIX
LEVEL
SET
U
O
O
+10
AUX 1 MASTER
U
O
O
+20
U
O
O
+20
AUX
RETURNS
1
2
NORMALLED
EFX TO
MONITOR
ALT
3–4
ASSIGN
TO MAIN MIX
SOURCE
TAPE
SOLO
MODE
MAIN
MIX
dB
30
20
10
O
O
40
50
50
5
5
U
60
10
dB
30
20
10
O
O
40
50
50
5
5
U
60
10
/ PHONES
CONTROL
ROOM
(NORMAL)
IN PLACE AFL
PRE-FADER
(LEVEL SET)
AUX 1
SELECT
PRE
POST
Still with us? Good for you. Here come the
tricky parts, where the mixing is really done.
MAIN MIX
As the name implies, this fader controls the
levels of signals sent to the
MAIN OUTPUTS:
XLR ,
1
⁄
4
" and RCA
TAPE OUT . All
channels and
AUX RETURNS that are not
muted or turned fully down will wind up in the
MAIN MIX.
MAIN MIX.
Fully down is off, the “U” marking is unity
gain, and fully up provides 10dB additional
gain. This additional gain will typically never
be needed, but once again, it’s nice to know it’s
there. These are the faders to pull down at the
end of the song when you want The Great
Fade-Out.
gain. This additional gain will typically never
be needed, but once again, it’s nice to know it’s
there. These are the faders to pull down at the
end of the song when you want The Great
Fade-Out.
VLZ MIX
ARCHITECTURE
When designing a mixing
circuit, the lowest noise and
best crosstalk specs are achieved by using Very
Low Impedance (VLZ). To implement VLZ in a
mixer, the power supply must be able to de-
liver plenty of current to the circuitry. That’s
why those “wall wart” mixers are often noisy –
they can’t power a VLZ circuit.
Low Impedance (VLZ). To implement VLZ in a
mixer, the power supply must be able to de-
liver plenty of current to the circuitry. That’s
why those “wall wart” mixers are often noisy –
they can’t power a VLZ circuit.
At Mackie, audio quality is much more im-
portant than the price of wall warts. All of our
mixers employ VLZ and built-in power supplies
that deliver more than enough current, result-
ing in sonic specifications that rival consoles
upwards of $50,000!
mixers employ VLZ and built-in power supplies
that deliver more than enough current, result-
ing in sonic specifications that rival consoles
upwards of $50,000!
SOURCE MATRIX
Typically, the engineer sends the
MAIN MIX
to an audience (if live) or a mixdown deck (if
recording). But what if the engineer needs to
hear something other than the
recording). But what if the engineer needs to
hear something other than the
MAIN MIX?
With the MS1402-VLZ, the engineer has sev-
eral choices of what to listen to. This is one of
those tricky parts, so buckle up.
eral choices of what to listen to. This is one of
those tricky parts, so buckle up.
Via the
SOURCE switches, you can choose
to listen to any combination of
MAIN MIX, ALT
3-4 and TAPE. By now, you probably know
what the
what the
MAIN MIX is. ALT 3-4 is that addi-
tional stereo mix bus.
TAPE is the stereo signal
coming in from the
TAPE IN RCA jacks .
Selections made in the
SOURCE matrix de-
liver stereo signals to the
CONTROL ROOM,
PHONES and METERS. With no switches en-
gaged, there will be no signal at these outputs
and no meter indication.
gaged, there will be no signal at these outputs
and no meter indication.
The exception to that is the
SOLO function
. Regardless of the
SOURCE matrix selec-
tion, engaging a channel’s
SOLO switch will
replace that selection with the
SOLO signal,
also sent to the
CONTROL ROOM, PHONES
and
METERS. This is what makes the Level
Setting Procedure so easy to do.
WARNING: Pushing in
both the
TAPE button (in
the
SOURCE matrix) and
ASSIGN TO MAIN MIX
can create a feedback
can create a feedback
path between
TAPE IN and TAPE OUT.
Make sure your tape deck is not in record,
record-pause or input monitor mode when
you engage these switches, or make sure
the
record-pause or input monitor mode when
you engage these switches, or make sure
the
CONTROL ROOM / PHONES fader is
fully down (off).
OUTPUT SECTION DESCRIPTION