Seventeam ST-650Z-AF Leaflet

ST-650Z-AF

Ver. 1.0

INPUT CHARACTERISTICS:

VOLTAGE: 100VAC ~ 240

VAC

FREQUENCY: 50

~60

INPUT CURRENT:

10~6 A (RMS)

INRUSH CURRENT: 160A MAX

SPECIFICATION:

  EFFICIENCY: 80% MAXIMUM, FULL LOAD CONDITION AT 230 VAC INPUT.
  POWER GOOD SIGNAL: ON DELAY TIME 100 ~ 500 ms, OFF DELAY TIME 1ms.
  HOLD UP TIME: 14ms AT 25℃  80% LOAD CONDITION AT 115-230 VAC INPUT.
  OPERATING TEMPERATURE RANGE: 5℃ ~ 50℃.
  REMOTE ON/OFF CONTROL: THE POWER SUPPLY OUTPUT SHALL BE ENABLED WITH AN

ACTIVE-LOW TTL SIGNAL. WHEN TTL SIGNAL IS LOW, THE DC OUTPUTS ARE TO BE ENABLED.
WHEN TTL SIGNAL IS HIGH OR OPEN CIRCUITED, THE DC OUTPUTS ARE TO BE DISABLED.

OVER POWER PROTECTION: AT 230 VAC INPUT THE POWER SUPPLY WILL SHUT DOWN ALL

DC OUTPUT WITH IN 110% TO 140% OF FULL LOAD.

  OVER VOLTAGE PROTECTION: +5V → 7.5V, +12V → 16.5V, +3.3V → 4.8V.
  EMI REQUIREMENT: FCC PART 15 SUBPART B, CLASS B AT SYSTEM LOAD, CISPR 22 CLASS B.
  SAFETY: TUV,CUL, CE,CB, FCC,BSMI
  DIMENSION: 160 (D) x 150 (W) x 86 (H) mm.
  COOLING: ONE 120mm DC FAN.
  ACTIVE POWER FACTOR CORRECTION: EN 61000-3-2: 1995+A1+A2: 1998, CLASS D.

OUTPUT CHARACTERISTICS:

OUTPUT CURRENT

REGULATION

OUTPUT

VOLTAGE

MIN

[A]

MAX

[A]

LOAD

LINE

RIPPLE

MAX

[P-P]

NOISE

MAX

[P-P]

+12V1

1.0

±5%

±1%

120mV

+12V2

1.0

±5%

±1%

120mV

+5V

1.0

±5%

±1%

50mV

+3.3V

1.0

±5%

±1%

50mV

-12V

0.8

±10%

±1%

120mV

+5VSB

0.1

2.5

±5%

±1%

50mV

1. MAXIMUM CONTINUOUS COMBINED LOAD ON +5V AND +3.3V OUTPUTS SHALL NOT EXCEED 150W.

2. MAXIMUM CONTINUOUS COMBINED LOAD ON +5V, +3.3V AND +12V OUTPUTS SHALL NOT EXCEED

630 W.

3. MAXIMUM CONTINUOUS TOTAL DC OUTPUT POWER SHALL NOT EXCEED 650W.