Oricom m5500 series User Manual

13

During a call, you will hear two loud beeps periodically to notify you of another incoming 
call. If you wish to answer this call,

. Press

R  key. You will hear a dial tone.

.  

Press

2  to put the current call on hold and talk with the second caller.

. Repeat steps 1-2 to swap between the two callers.

Recall settings are: Australia (100ms, SHORT); New Zealand (600ms, LONG).

If this feature does not work correctly, check the country option. To change the Recall 
settings, press and hold 

/P  key on the cordless handset to switch between “LONG” 

and “SHORT” on the display.

If you have connected your telephone to a PABX, you can use all the facilities such as 
call transfer, automatic recall, etc. The  R  key provides access to these facilities.

Recall feature can be used when you are using some services provided by your 
network operators such as “call waiting”, etc. A subscription may apply for these 
services, contact your network operators for more information.

While you are talking on the phone, press  R  key on the base unit or 

 /R   key on 

the cordless handset to send a Recall (flash signal).

You can use the recall function to answer a second call while you are on the phone. 
However this service need to be turned on. For example, to turn on Telstra’s Call Waiting 
service:

. Press

 on the base unit or 

 on the cordless handset to wait for dial tone 

then press 

4

3

# .

. You will hear a service tone then press 

 or 

 mentioned above.