Omega OMB-DAQBOARD-3000 User Manual

 

1-2    Daq Systems and Device Overviews 

988093

 

DaqBoard/3000 Series User’s Manual 

 

 

 

 

* Note:  DaqBoard/3006 has 16 single-ended analog inputs; ±10V input range only;  

it has no differential input.  DaqBoard/3006 has no HDMI interface. 

 

Reference Note:  
For the DaqBoard/3000 Series installation procedure, refer to the DaqBoard Installation 
Guide (1033-0940).  A copy of the guide is included at the beginning of this manual.   

 

All input and output signals are available at the 3000 Series board’s 68-pin SCSI 

connector.  Chapter 2 includes a pinout.  A TB-100 screw-terminal board or a DBK215 
BNC / screw-terminal module can be used to make all signal I/O connections.  Either of 
these two termination options can be connected to the DaqBoard/3000 Series SCSI 
connector via one of the following cables. 

 

CA-G55 

68-conductor ribbon expansion cable.  3 feet. 

 

CA-G56 

68-conductor shielded expansion cable.  3 feet. 

 

CA-G56-6 

68-conductor shielded expansion cable.  6 feet. 

 

The HDMI connector can be used to connect a PDQ30 analog expansion module 
to a DaqBoard/3000 Series board.  Details are provided in Chapter 2 of this manual.   
Cable CA-266-3 (3 ft.) [or CA-266-6 (6 ft.)] is used to connect the PDQ30 to the 3000 
Series board. 

The HDMI connector is not present on DaqBoard/3006.