Casio exilim ex-n1 User Manual

Page of 128
35
Snapshot Tutorial
1.
In the REC mode, press [2] ( ) once.
2.
Use [4] and [6] to select the flash 
setting you want and then press [SET].
• If there are no indicators on the monitor 
screen, you can cycle through the flash 
modes by pressing [2] ( ). You can turn 
display information on or off by pressing 
[8] (DISP) (page 11).
3.
Press the shutter button to shoot.
• For information about Flash Range, see page 125.
Using Flash (Flash)
Setting
REC Screen 
Icon Display
Description
 Auto Flash
None
Flash fires automatically in accordance with 
exposure (amount of light and brightness) 
conditions.
 Flash Off
Flash does not fire.
 Flash On
Flash always fires. This setting can be used to 
brighten a subject that normally comes out dark 
due to daylight or backlight (daylight synchro 
flash).
 Red Eye 
Reduction
Flash fires automatically. This type of flash can be 
used to reduce the chance of redness in the 
subject’s eyes.
Flash
[2] (
)
>
?
<
¥
Back lamp
Flashes orange while the flash is charging to 
indicate that image recording is disabled.
• You will not be able to take another flash 
snapshot until the lamp stops flashing 
orange, which indicates that charging is 
complete.
<
 indicates the flash will fire.