Mitsubishi t300 User Manual
66
S
CREEN
M
ESSAGES
Message
Description
Phone locked
• To use the phone, the 3-digit lock code must
first be entered.
Battery full!
• Battery has finished charging.
Charging
• The phone is charging normally while powered
off. Since the phone is off, you cannot make or
receive calls.
receive calls.
• You can press the
key to turn on the phone
and operate it normally. The battery will con-
tinue to charge.
tinue to charge.
Low battery! and
phone beeps
phone beeps
• The battery is about to run out. The phone
should be turned off and the battery recharged
or replaced. The phone will turn itself off within
three minutes.
or replaced. The phone will turn itself off within
three minutes.
Unlock softkey
• Keypad lock is activated which prevents acciden-
tal key presses. Press Unlock
and
to
turn
off this feature.
No service
• Phone cannot connect to the network (calls can-
not be placed or received), either because the
signal is too weak or the local network does not
support your phone. Try moving to another
location to use your phone.
signal is too weak or the local network does not
support your phone. Try moving to another
location to use your phone.
Voice mail number
not set
not set
• The voice mail center phone number must be set
up before using voice message access. Select
Voice mail, then select Set number. Enter the
number and press OK . Now you can press
and hold
Voice mail, then select Set number. Enter the
number and press OK . Now you can press
and hold
to speed dial your voice mail access
number from the standby screen.