Mitsubishi t300 User Manual
9
B
ASIC
P
HONE
O
PERATIONS
Turning On the Phone
>
Standby Screen
This example of a standby screen shows
the name of the network and/or service
provider, signal strength, battery level and
Digital system (if available) icons.
the name of the network and/or service
provider, signal strength, battery level and
Digital system (if available) icons.
• Use the Express key to go to:
Volume controls (see page 51)
Contacts (see page 36)
Main menu (see page 26)
Alert mode (see page 50)
To set time and date, see page 52.
• Press Quiet
• Press Quiet
then
to turn off all incoming ring tones, alerts and
key presses. See Quiet Mode on page 20 for details.
• Press Keylock then
to lock the keypad. This prevents acciden-
tal key presses while the phone is on. See Keypad Lock on page 11.
Making a Call
To store the dialed number in the Contact list, press Options
and
select Store number before pressing
to connect the call.
While the call is connecting, the dialed number displays. If the number
matches a Contact entry, the name and number display.
If the call does not connect and Auto redial is activated, the phone will
attempt to dial again (see page 46 for details).
matches a Contact entry, the name and number display.
If the call does not connect and Auto redial is activated, the phone will
attempt to dial again (see page 46 for details).
1
Press and hold
. A picture animation displays and a
turn-on tone sounds.
2
If the phone is locked, Phone locked will display. Enter the
3-digit lock code.
3-digit lock code.
1
Enter the telephone number you wish to dial.
Correct any mistakes by pressing Clear . Press and hold
this key to erase the entire entry.
Correct any mistakes by pressing Clear . Press and hold
this key to erase the entire entry.
2
Press
to dial (send) the number.