ONKYO dv-sp503e User Manual

20

• Connect the DV-SP503E to the TV directly. If you 

connect the DV-SP503E to a VCR, TV/VCR combina-
tion, or video selector, the playback picture may be 
distorted as DVD videos are copy protected.

If your TV (or other equipment) has an S Video input, 
you can use this instead of the standard (composite) out-
put for a better quality picture.
• Use an S Video cable (supplied) to connect the S 

VIDEO OUTPUT to an S Video input on your TV (or 
monitor or AV receiver).

Line up the small triangle above the jack with the same 
mark on the plug before plugging in.

You can use the component video output instead of the 
standard video out jack to connect this player to your TV 
(or other equipment).
This should give you the best quality picture from the 
three types of video output available.
• Use a component video cable (not supplied) to con-

nect the COMPONENT VIDEO OUTPUT jacks to a 
component video input on your TV, monitor or AV 
receiver.

Note:
• Watching progressive scan video from the component 

video outputs 
This player can output progressive scan video from the 
component video output. Compared to interlace video, 
progressive scan video effectively doubles the scan-
ning rate of the picture, resulting in a very stable, 
flicker-free image. To set up the player for use with a 
progressive scan TV, see Video Output settings on 
page 46. When the player is set to output progressive 
scan video, the PROGRESSIVE indicator lights in the 
front panel display.

Important:
• If you connect a TV that is not compatible with a pro-

gressive scan signal and switch the player to progres-
sive, you will not be able to see any picture at all. In 
this case, switch everything off and reconnect using 
the supplied video cable, then switch back to Interlace 
(see page 21).

If your TV has a SCART-type AV input, you can use a 
SCART cable to connect this player to your TV. This 
type of connection carries both the sound and the picture, 
so there’s no need to connect up the AUDIO OUTPUT 
L/R and VIDEO OUTPUT jacks.
• Use a SCART cable (supplied) to connect the AV 

CONNECTOR to an AV input on your TV.

This connector can output composite video, S Video, or 
RGB video. The default setting is composite, which 
should work with all TVs. Consult the manual that came 
with your TV to see if you can use one of the higher qual-
ity settings. See page 46 for how to change the video out-
put.

TV

TV

TV