Casio classpad 330 3.04 User Manual
20060301
Selecting a Number Base
Specifying a default number base in the Main application will apply to the current line
(expression/result pair), and to all subsequent lines until you change the default number base
setting. Use the number toolbar’s base buttons to specify the number base.
(expression/result pair), and to all subsequent lines until you change the default number base
setting. Use the number toolbar’s base buttons to specify the number base.
S To select the number base for the line where the cursor is located
(1) Tap the down arrow button next to the
;
button.
• This displays a palette of number base buttons.
2-7-3
Specifying a Number Base
(2) Tap the button that corresponds to the number base you want to use.
• To select binary, for example, tap
.
• The currently selected number base is indicated in the status bar.
Normal
Binary
Octal
Decimal
Hexadecimal
(3) Execute the calculation.
• When you press
to execute the calculation, the number base you selected in
step 2 is also applied automatically to the next line. You can continue using the same
number base in the next line or change to another number base.
number base in the next line or change to another number base.
Important!
• A line for which a number base is not specified is called a “normal calculation line.” To
return a line to a normal calculation line, tap ; in step 2 of the above procedure.
• Calculation results produced by a line for which a number base is specified are followed by
one of the suffixes listed below, to indicate its number system.
Number System
Suffix
Binary
b
Octal
o
Decimal
d
Hexadecimal
h