Casio exilim ex-z3000 User Manual

17

Quick Start Basics

The back lamp should 
light red, indicating that 
charging has started.
The back lamp will go 
out when charging is 
complete.
It takes about 
190 minutes to bring a 
fully dead battery to a 
full charge.

• A battery that has not 

been used for a long 
time, or ambient 
temperature 
extremes can cause 
charging to take 
longer than normal. If 
charging takes longer 
than about six hours, a timer will terminate it automatically, even if the battery is 
not fully charged. This is indicated by the back lamp flashing red. If the battery 
has not been used for a very long time, charging may be terminated 
automatically and the back lamp may start flashing red after only about 45 
minutes. In either case, disconnect the USB cable from the camera and then 
reconnect it to resume charging.

• Note that even while the connector is fully inserted, you 

still will be able to see the metal part of the connector as 
shown in the illustration.

Lit Red

Charging

Flashing Red

Abnormal ambient temperature, 
USB-AC adaptor problem, 
battery problem, or charging 
terminated by timer (page 119)

Off

Charging complete

USB cable 
(included with camera)

Making sure that the 6 mark on the camera is aligned 
with the 4 mark of the USB cable connector, connect 
the cable to the camera.

[USB/AV] port

Small connector

USB-AC adaptor

Back lamp