Garmin rino 110 User Manual

A

PPENDIX

 > 

GPS T

ROUBLESHOOTING

 G

UIDE

Unit does not turn on.

Batteries are exhausted.

Replace batteries.

Unit does not turn on, even with new batteries.

Batteries may be installed backwards.

Reinstall batteries.

You are pressing and releasing the Power button.

You must press and hold the Power button for 2 seconds.

The unit turns on, then turns off.

Batteries may be nearly exhausted.

Replace batteries.

It takes more than ten minutes to get a location fix

The unit’s view of satellites is obstructed.

Move to a locatin with a clear view of the sky.

Cannot access a WAAS system satellite after 2 to 5 

minutes.

Your view of the satellite is obstructed or you are 

located too far from satellites currently in service for the 

Americas

Move to a location with a clear view and point the unit 

antenna in the direction of the satellite.

System GPS operation is set to something other than 

Normal and/or interface setting is set for RTCM.

Set system GPS to Normal and interface to other than 

RTCM. Or simply turn off WAAS.

Cannot obtain a differential position from WAAS

You have not collected enough information from the 

WAAS satellite.

Wait 10–20 minutes for the initial collection, then 1–2 

minutes afterwards.

Cannot access Point of Interest, Street, or Intersection 

Find Lists.

MetroGuide map data is not activated.

Access the Map Setup Map option and activate the check 

box.

Cannot view a track being laid down on the map 

page when traveling.

The Track Log feature is turned off.

Access the Tracks Page, highlight the On button and press 

the Thumb Stick In.

Cannot see the panning arrow on the Map Page 

easily.

There is too much map clutter or the scale is such that 

map features are too densely displayed.

Use the Map Page Setup Page to reduce map clutter or 

change the map scale.

Cannot exit a menu or page by moving the Thumb 

Stick to the Left.

Some menus and pages have an “X” (Exit) on-screen 

button in the upper right corner.

Highlight the on-screen button and then press the Thumb 

Stick In.