Cadillac catera 1999 User Manual

MIST: Tap the lever up and then release it for a single
wipe cycle. For more cycles, pull and hold the lever.

= (HIGH): Move the lever all the way up for a fast
wiper speed.

 (LOW): The third position up controls the low 

wiper speed.

 (DELAY): This position is for a controlled delay

setting. Rotate the control dial on the lever to increase or
decrease the delay between wipe cycles.

o (OFF): This position turns off the wipers.

Be sure to clear ice and snow from the wiper blades
before using them. If they’re frozen to the windshield,
carefully loosen or thaw them. If the blades do become
damaged, replace them with new blades.
See“Windshield Wiper Blade Replacement” in 
the Index.

Heavy snow or ice can overload the wiper motor. A
circuit breaker will stop the motor until it cools. Clear
away snow or ice to prevent an overload.

Pull and hold the washer
lever to wash the
windshield. Release the
lever when you have
enough fluid. The wipers
will clear the windshield
and either stop or return to
your preset speed.

A telltale light on the instrument panel will be displayed
when the washer fluid reaches a low level. See “Low
Washer Fluid Warning Light” in the Index for 
more information.