Cadillac eldorado 2002 User Manual

If your vehicle has this
feature, the controls are
located on the driver’s 
door armrest.

These buttons are used to program and recall memory
settings for the driver’s seating and outside rearview mirror  
positions. Use the following steps to program each button:

1. Adjust the driver’s seat (including lumbar adjustments)  

and both outside mirrors to a comfortable position.

2. Press the SET button.

3. Within five seconds, press button 1. A single beep

will sound through the driver’s side front speaker to
let you know that the position has been stored.

A second mirror and seating position may be
programmed by repeating the above steps and pressing
button 2 instead of button 1. Each time button 1 or 2 is
pressed and released while the vehicle is in PARK (P),
the memory position will be recalled. Each time a
memory button is pressed, a single beep will sound.

You can also recall a seat and mirror position if your
vehicle is not in PARK (P). Press and hold either 
the 1 or 2 button until seat and mirror movement is
complete. Releasing the buttons will stop adjustment.

If you use the button with the unlock symbol on the
remote keyless entry transmitter to enter the vehicle, the
preset driver’s seat and mirror positions will be recalled.
The numbers on the back of the transmitters, 1 or 2,
correspond to the numbers on the driver’s armrest.

If the remote keyless entry transmitter was not used to
enter the vehicle, the last used seat and mirror positions
will be recalled when a key is inserted in the ignition
and is turned to RUN. The vehicle must be previously
programmed to turn this feature on. See “Memory and
Personalization Features” in the Index.