Cadillac eldorado 2002 User Manual

When this feature is turned on, the passenger’s side
rearview mirror will tilt downward when the transaxle 
is shifted to REVERSE (R). The mirror returns to its
previously programmed position once the transaxle is
shifted out of REVERSE (R). See “Curb View Assist
Mirror” in the Index for more information on this feature.

Mode 1 (MIRROR TILT IN REV): Turns feature on.

Mode 2 (MIRROR TILT IN REV): Turns feature off.

Before your vehicle was shipped from the factory, it was
programmed to Mode 2. The mode to which the vehicle
was programmed may have been changed since it left
the factory. To determine the mode to which the vehicle
is programmed or to program the vehicle to a different
mode, do the following:

1. Enter feature programming following the

instructions listed previously.

2. Press the SKIP INFO button until MIRROR 

TILT IN REV appears on the display.

3. Press YES TRIP RESET to select this feature 

for programming.

4. A yes or no response must be made after each mode

is displayed in order to continue to the next mode.
Press the YES TRIP RESET button to indicate yes 
to turn this feature on, or press NO INFO RESET to
turn this feature off.

FEATURE ON is displayed after a yes response. 
If you respond with no, FEATURE OFF is 
briefly displayed.

STORAGE MODE will appear on the display once 
a mode has been selected for the curb view assist
mirror feature.

If you press the SKIP INFO button, the menu will
advance to the next feature available for programming.

The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.