Olympus camedia d-390 User Manual

How to hardwire the Olympus D-390 Digital Camera

(External battery method)

http://www.PixController.com

This document covers in detail how to modify the Olympus D-390 Digital Camera so that the

shutter can be controlled remotely. Use the standard RSP PIC chip with this method.

Please

note that if you make this modification to your Olympus camera that you will void your

camera’s warranty. This modification can also result in damage to your digital camera if

you do not follow the instructions properly.

Tools Needed

1. 2.4 mm #0 Philips Screwdriver & Small Flat Blade Screwdriver.

Remove the camera covers

The first step is to remove the back

cover of the D-390. This is easily done

by removing the 8 small Philips screws

from the case.

Be sure to remove the xD Media card

and batteries before removing the

case.

Camera control contact points

These are the contact points to control

the camera shutter and refresh

controls. These contact points are

much smaller than the D-370 or D-

380, so you have to be careful when

soldering wires to these points.