ICOM IC F110S User Manual
11
3
CONNECTION AND MAINTENANCE
■Mounting the transceiver
The universal mounting bracket supplied with your transceiv-
er allows overhead mounting.
• Mount the transceiver securely with the 4 supplied screws
er allows overhead mounting.
• Mount the transceiver securely with the 4 supplied screws
to a thick surface which can support more than 1.5 kg.
Flat washer
Spring washer
When using
self-tapping screws
self-tapping screws
■Optional UT-108 installation
Install the optional UT-108 DTMF decoder unit as follows:
q Turn the power OFF, then disconnect the DC power cable.
w Unscrew the 4 screws, then remove the bottom cover.
e Install the unit as shown in the diagram below.
r Replace the bottom cover and screws, then re-connect the
w Unscrew the 4 screws, then remove the bottom cover.
e Install the unit as shown in the diagram below.
r Replace the bottom cover and screws, then re-connect the
DC power cable.
UT-108
Front panel
IC-F110_210S_EUR-2.qxd 05.9.16 10:32 AM Page 11 (1,1)