ZyXEL Communications prestige p-2002 User Manual

P-2002 Series User’s Guide

72

Chapter 7 Phone

If you have another call, press the flash key  to switch back and forth between caller A and B 
by putting either one on hold.

If you hang up the phone but a caller is still on hold, there will be a remind ring.

This allows you to place a call on hold while you answer another incoming call on the same 
telephone (directory) number. 

If there is a second call to your telephone number, you will hear a call waiting tone. 

Press the flash key to put the first call on hold and answer the second call.

Do the following to transfer an incoming call (that you have answered) to another phone.

1 Press the flash key to put the caller on hold.

2 When you hear the dial tone, dial “*98#” followed by the number to which you want to 

transfer the call. to operate the Intercom.

3 After you hear the ring signal or the second party answers it, hang up the phone.

Use the following steps to make three-way conference calls.

1 When you are on the phone talking to someone, place the flash key to put the caller on 

hold and get a dial tone. 

2 Dial a phone number directly to make another call.

3 When the second call is answered, press the flash key, wait for the sub-command tone 

and press “3” to create a three-way conversation.

4 Hang up the phone to drop the connection.

5 If you want to separate the activated three-way conference into two individual 

connections (one is on-line, the other is on hold), press the flash key, wait for the sub-
command tone and press “2”.

Click PHONE in the navigation panel and then Common to display the following screen. Use 
this screen to configure general phone settings.