Cisco Systems catalyst 3560 User Manual
21
Installing an SFP Module and Connecting to a Module Port
Follow these steps:
For a list of supported modules, see the release notes on Cisco.com. For detailed instructions on
installing, removing, and connecting to SFP modules, see the documentation that came with the SFP
module.
installing, removing, and connecting to SFP modules, see the documentation that came with the SFP
module.
Caution
Removing and installing an SFP module can shorten its useful life. Do not remove and
insert SFP modules more often than is absolutely necessary.
insert SFP modules more often than is absolutely necessary.
Step 1
Grasp the module on the sides, and
insert it into the switch slot until you
feel the connector snap into place.
insert it into the switch slot until you
feel the connector snap into place.
Step 2
Insert an appropriate cable into the
module port.
module port.
Note
If your switch has a
dual-purpose port, see the
“Connecting to a Dual-Purpose
Port” section on page 22 for
additional considerations.
dual-purpose port, see the
“Connecting to a Dual-Purpose
Port” section on page 22 for
additional considerations.
Step 3
Insert the other cable end into the other device.
2
2
1
1
Catalyst 3560G
SERIES
PoE-48
33
34
37
38
39
40
41
42
43
44
45
46
47
48
35
36
33X
34X
47X
48X
49
50
51
52
SFP module
2
2
1
1
Catalyst 3560G
SERIES
PoE-48
33
34
37
38
39
40
41
42
43
44
45
46
47
48
35
36
33X
34X
47X
48X
49
50
51
52
SFP module port