ICOM ic-e2820 User Manual

DV MODE OPERATION (Optional UT-123 is required)

D When calling the desired station

Continued instruction from step v on page 38.

b Rotate [DIAL] to select “YOUR,” then push [MAIN•BAND].

• YOUR CALL SIGN screen is displayed.

n Rotate [DIAL] to select the call sign channel in which de-

sired station’s call sign is programmed.

• See page 38 for station call sign programming details.

m Push [BACK](V/MHz•SCAN)

(Right band’s)

to set the sta-

tion’s call sign and return to CALL SIGN screen.

, Push [BACK](V/MHz•SCAN)

(Right band’s)

again to return

to function guide 2 indication.

. Perform the instruction steps t to y on page 38.

D When sending a CQ

Continued instruction from step v on page 38.

b Push [CQ](DUP•MONI) to set “CQCQCQ” as the call sign.
n Push [BACK](V/MHz•SCAN)

(Right band’s)

to return to

function guide 2 indication.

m Perform the instruction step t to y on page 38.

✔ For your information!
Your own

(MY)

call sign, Station call sign and repeater call

sign can also be programmed/edited in “CALL SIGN” screen.

In addition, when editing a call sign stored in a call sign mem-
ory, regular memory or call channel, the default operation is to
over-write a programmed call sign in regular memory and call
channels.

(Temporary operation without over-writing is possible.)

However, the edited call sign can store into a blank channel
automatically when “AUTO” is set with the EDIT RECORD

(p. 102)

zWhile displaying “CALL SIGN” screen, rotate [DIAL] to select

either “YOUR,” “RPT1/2” or “MY” then push [MAIN•BAND].

xRotate [DIAL] to select the desired call sign memory chan-

nel then push [MAIN•BAND].

cRotate [DIAL] to select the desired call sign memory chan-

nel then push [MAIN•BAND].

vRotate [DIAL] to select the desired character.

• Push [ABC](TONE•DTMF) to select the character group from

capital letter characters.

• Push [12/](M/CALL•MW) (Right band’s) to select the character

group from numbers or symbol.

• Push [>](M/CALL•MW) (Left band’s) or [<](V/MHz•SCAN) (Left

band’s) to move the cursor right or left, respectively.

• Push [CLR](DUP•MONI) to clear the selected character.
• Push [GW](LOW•PRIO) (available only when RPT1/2 is selected

in step

z) to turn the gateway setting ON/OFF.

bAfter the desired call sign

(up to 8-characters)

is entered,

push [BACK](V/MHz•SCAN)

(Right band’s)