Cadillac escalade 2002 User Manual

You may see the
STABILITY SYSTEM
ACTIVE message on 
the message center.

It means that an advanced computer

-

controlled system

has come on to help your vehicle continue to go in 
the direction in which you’re steering. This stability
enhancement system activates when the computer senses
that your vehicle is just starting to spin, as it might if
you hit a patch of ice or other slippery spot on the road.
It also activates when it senses that your wheels are
spinning, as they might when accelerating on a road
surface that provides inadequate traction. When the
system is on, you may hear a noise or feel a vibration in
the brake pedal. This is normal. When the STABILITY
SYSTEM ACTIVE message is on, you should continue
to steer in the direction you want to go. The system is
designed to help you in bad weather or other difficult
driving situations by making the most of whatever road
conditions will permit.

The STABILITY SYSTEM
LIMITED message will 
turn on when you press 
the Stabilitrak button; 
see “Instrument Panel” 
in the Index.

While in “LIMITED” mode, traction control is disabled
and the stability system is less likely to activate. To limit
wheel spin and realize the full benefits of the stability
enhancement system, you should normally leave
Stabilitrak in its normal operating mode (not the
LIMITED mode). However, you should put Stabilitrak
in LIMITED mode if your vehicle gets stuck in sand,
mud, ice or snow and you want to “rock” your vehicle to
attempt to free it. See “Rocking Your Vehicle” in the
Index. To exit the LIMITED mode, press the Stabilitrak
button again. The STABILITY SYSTEM LIMITED
message will be displayed whenever the transmission is
in FIRST (1). Traction control will not operate in this
gear. This is normal.